How to set up my new MOCREO Hub?
------------------------------------------------
The following tips can help you set up a new Hub (or pair it):

- Make sure you have the latest version of the MOCREO Sensor app from the Apple App Store or Google Play Store.

- Confirm that you have successfully registered an account and successfully logged in to the app. (If you do not know how to register an account,  `click here <./how-to-create-an-account.html>`_)

- After successfully logging in to the app, remove the Hub and power adapter from the packaging and power the Hub.

- Confirm that your Wi-Fi network is using 2.4GHz or "dual-band" mode (2.4GHz and 5GHz).If you're unsure whether you have 2.4GHz. Enter the router's settings page to see if Wi-Fi is 2.4GHz or "dual-band" mode (2.4GHz and 5GHz).

- Place the Hub close to the router so that the Hub can better receive signals from the router. And then start the Hub and erect the antenna.

- Open the MOCREO Sensor app to the home screen, click on the top right corner of the home screen "+" to select the Hub.

- You will see the Hub using any of the two network types to connect to the server.

Connect to Wi-Fi
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

- Jump to the page, follow the prompts to operate, press the Hub button for 5 seconds until the blue light comes on.

- Enable Bluetooth and location permissions.

  - Android10 open

    - “bluetooth permission”

    - “location permissions”

  - Android12 and above open

    - “bluetooth permission”

    - “nearby devices”

- Begin scanning for devices, then jump to the Wi-Fi selection list interface.

- Select the Wi-Fi you want to connect to.

- Jump to the password input page, enter the correct Wi-Fi password and click "Connect."

- Then jump to the screen to start connecting to the network

- Connect to MOCREO cloud

- Connect to bind account

If you encounter obstacles during the Setup process, click `Hub Troubleshooting <../troubleshooting/setup-hub-troubleshooting.html>`_ to view troubleshooting solutions.

Connect to Ethernet
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

- Click "Connect to Ethernet"

- Jump to the page, follow the prompts to operate, press the Hub button for 5 seconds until the blue light comes on.

- The screen displays the Hubs that are on the same network as your phone.

- Select the Hub, and then a pop-up Connect appears

- Click Connect, a successful connection will jump to the screen, prompt you that the Hub connection is successful.

If you encounter obstacles during the Setup process, click `Ethernet Troubleshooting <../troubleshooting/setup-hub-troubleshooting.html#connect-to-ethernet-troubleshooting>`_ to view troubleshooting solutions.