Router Rebooter - What are the functions of NM1?
=====================================================================================

Wi-Fi Network
------------------------------------------
To view detailed configuration information for the currently connected Wi-Fi network, in order to understand the network settings of the device. (Cannot be modified)

.. image:: /media/nm1settings-1.png
  :align: center
  :width: 450px
  :height: 450px

Date/Time
-------------------------------------
Set the correct time zone information based on your current geographical location.

.. image:: /media/nm1settings-2.png
  :align: center
  :width: 450px
  :height: 450px

Monitor List
--------------------------------------------------------
Manage the Auto Ping list
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  - Add Monitor >>> Button to add Auto Ping
  - Name >>> Name of Auto Ping
  - Schedule >>> Management of working hours for Auto Ping
  - Enabled >>> Toggle to enable/disable Auto Ping
  - Operation >>> Edit details of Auto Ping
  - Delete >>> Delete Auto Ping

.. image:: /media/nm1settings-3.png
  :align: center
  :width: 450px
  :height: 150px

Ping Target Domain IPv4 Address
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  - Manage IPv4/URL
  - Add IPv4/URL

Consider as Failure When No Response from
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  - Manage failure conditions when pinging IPv4, divided into Any Target and All Target
    - Any Target >>> Failure condition triggered when all targets fail
    - All Target >>> Failure condition triggered when any target fails
    * If only one IPv4 address needs to be pinged, this rule does not need to be specifically set

Options for Ping
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  - Time between pings: Interval between each round of Ping operations
  - Ping Wait Pong Timeout: Timeout for waiting for a response during Ping operations
  - Consecutively Retries Before Attempt Reboot: Number of retries before attempting a reboot

.. image:: /media/nm1settings-4.png
  :align: center
  :width: 450px
  :height: 450px

Upon Auto Ping Failure...
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  - Do Power Cycle Reboot: Power socket to reboot when Ping operation fails
  - Send E-mail: Notification via email when Ping operation fails

Options for Power Cycle
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  - Duration of Power Cycle (Off-to-On): Duration of the power socket's on-off cycle when Ping operation fails
  - Device Reboot Delay: Delay in waiting for the power socket to reboot when Ping operation fails
  - Total times to attempt reboot: Maximum number of reboot attempts when Ping operation fails

.. image:: /media/nm1settings-5.png
  :align: center
  :width: 450px
  :height: 450px

Built-in Outlet
-----------------------------------------------------------------
Outlet Control
+++++++++++++++++++++++++++++++++++++++++++++++++++++
  - Click the button to control the current state
  - Power Cycle: Perform one relay reboot operation

.. image:: /media/nm1settings-6.png
  :align: center
  :width: 450px
  :height: 450px

Power Loss Recovery Mode
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
  - Turn all Outlets off: The relay is always in the off state after each reboot
  - Turn all Outlets on: The relay is always in the on state after each reboot
  - Return to pre-power loss state: The relay returns to the state before the power loss

.. image:: /media/nm1settings-7.png
  :align: center
  :width: 450px
  :height: 450px

Notifications
--------------------------------------------
  - Configure email (For specific configuration methods, please refer to `Remote Alert Mailbox Configuration Method <../alerts/remote-alert-mailbox-configuration-method.html>`_)

.. image:: /media/nm1settings-8.png
  :align: center
  :width: 450px
  :height: 225px