Release Notes ============================================ .. github emoji: https://gist.github.com/rxaviers/7360908 IoT Hub --------------------------- 🍀 **2.0.2** (2025-05-07) Bug Fixes - **fix(sensor):** Fix known bugs 🍀 **2.0.1** (2025-01-14) Features - **feature(hub):** Added support for remote commands - **feature(hub):** Added Setup fails to upload logs to server - **feature(hub):** Hub Portal adds the ability to manually turn on remote logging Bug Fixes - **fix(sensor):** Fix known bugs 🍀 **1.9.8** (2023-12-18) Features - **feature(sensor):** Add support for SS1 Bug Fixes - **fix(sensor):** Fix data not being reported immediately after SS1 Setup completes - **fix(sensor):** Fix the problem that when reporting device status, it incorrectly reports the devices that are not in the dropped list - **fix(setup):** Fix the problem of red light after Setup is completed - **fix(sensor):** Fix known bugs 🍀 **1.7.9** (2023-01-10) Features - **feature(sensor):** Added the function of reporting data and alarm from BLE Sensor(ST6) Bug Fixes - **fix(sensor):** Fix known bugs 🍀 **1.7.5** (2022-12-21) Bug Fixes - **fix(Hub):** Fix bugs of abnormal beeping sound from the Hub 🍀 **1.7.1** (2022-11-15) Features - **feature(sensor):** Added the function of reporting data and alarm from BLE Sensor(SW2,ST5) Bug Fixes - **fix(sensor):** Fix known bugs 🍀 **1.7.0** (2022-08-16) Bug Fixes - **fix(sensor):** Fix known bugs 🍀 **1.6.7** (2022-02-21) Bug Fixes - **fix(sensor):** Fix known bugs 🍀 **1.6.5** (2021-09-09) Features - **feature(sensor):** Added ST4 sensor - **feature(sensor):** Optimize delete function - **feature(sensor):** Added Event fault event type Bug Fixes - **fix(sensor):** Fix known bugs 🍀 **1.2.7** (2020-12-21) Features - **feature(sensor):** Support adding Water Leak Sensor and Window & Door sensor - **feature(sensor):** Adapted to more types of temperature and humidity sensors - **feature(alarm):** Added a new Alerts control option (delay before Alerts) for Climate Sensor Bug Fixes - **fix(sensor):** Discard invalid value reported by sensor (-148’) - **fix(sensor):** Unable to disalarm the beeper in some cases App / Portal --------------------------- 🍀 **1.5.4** (2024-07-16) Features - **Feature (Sensor):** Added support for MS1, MS2. - **Feature (Sensor):** No longer show gray offline state for Sensors without network capability. - **Feature (Setting):** Add a new user information screen. Bug Fixes - **Fix (Sensor):** Fix Known Issues 🍀 **1.5.3** (2024-02-01) Features - **Feature (Sensor):** Added climate sensor SS1 with screen. - **Feature (Sensor):** ST8 data export function optimization. - **Feature (Sensor):** Some BLE Sensor specified versions perform upgrade checks and OTA. - **Feature (Sensor):** Time Selection Component Adjustments. - **Feature (Sensor):** ST7/ST8 added support for temperature calibration. - **Feature (Sensor):** Registration support for name information. Bug Fixes - **Fix (Sensor):** Fix Known Issues - **Fix (Sensor):** Hub Setup actively synchronizes information. - **Fix (Sensor):** Fixed abnormal display of home card 0°. 🍀 **1.5.2** (2023-11-03) Features - **Feature (Sensor):** Added "Scheduled Export" function. - **Feature (Sensor):** Added BLE Sensor OTA function. - **Feature (Sensor):** Optimized the content and font size of prompts. - **Feature (Sensor):** Optimized homepage cards. Bug Fixes - **Fix (Sensor):** Fix Known Issues - **Fix (Sensor):** Modify the temperature threshold range of temperature and humidity sensor. - **Fix (Sensor):** Fixed the problem that the second step of Hub Setup guide entry is incorrectly displayed. - **Fix (Sensor):** Fixed the issue that devices cannot be synchronized when the home page is refreshed. 🍀 **1.5.1** (2023-09-25) Bug Fixes - **Fix (Sensor):** Fix ST8 / ST7-CL incorrect temperature display when below freezing. 🍀 **1.5.0** (2023-08-25) Features - **Feature (Sensor):** Addition of a temperature and humidity sensor, equipped with a probe, namely ST9. - **Feature (Sensor):** Addition of an ultra-low temperature sensor, labeled as ST10. - **Feature (Settings):** The functionality of independent relay control has been added to ST7-CL. Bug Fixes - **Fix (Sensor):** Fix Known Issues 🍀 **1.4.9** (2023-08-02) Features - **Feature (Hub Setup):** Add a guided workflow for error status code (5) in the second step failure. - **Feature (Hub Setup):** Improve the issue with retrieving Hub version information in the fourth step, by proactively synchronizing server data when the "Retry" button is clicked. - **Feature (Support):** Add the option for users to provide their email address when submitting feedback, with the default being their user account. Bug Fixes - **Fix (Sensor):** Fix Known Issues 🍀 **1.4.8** (2023-07-03) Features - **Feature (Sensor):** Added the Temperature Sensor: ST8. - **Feature (Sensor):** Added the Temperature Controller: ST7-CL. - **Feature (Sensor):** Added support for no water alarm mode in SW2. Bug Fixes - **Fix (Sensor):** Fix Known Issues 🍀 **1.4.7** (2023-05-30) Bug Fixes - **fix(sensor):** Fix Known Issues 🍀 **1.4.6** (2023-05-10) Bug Fixes - **fix(sensor):** Fix Known Issues 🍀 **1.4.5** (2023-05-08) Bug Fixes - **fix(sensor):** Fix Known Issues Features - **feature(Settings):** Added New Hub offline notification switch in Alerts. - **feature(Settings):** Added New unbinding function in Hub Settings. - **feature(Settings):** Add a new style of temperature and humidity sensor data display. - **feature(Hub):** Add a Hub type: H2. 🍀 **1.4.3** (2023-01-10) Bug Fixes - **fix(sensor):** Fix Known Issues Features - **feature(sensor):** Added Climate Sensor - ST6. - **feature(Export Data):** Support exporting historical data to mailbox. 🍀 **1.4.0** (2022-11-16) Bug Fixes - **fix(sensor):** Cloud Synchronization of Device Information for Temp Sensor - ST7. - **fix(sensor):** Support for Setting Hub Beep for Individual Sensors. - **fix(sensor):** Fix Known Issues. Features - **feature(sensor):** Added Water Leak Sensor - SW2 - **feature(sensor):** Added Temp Sensor - ST5 - **feature(sensor):** Added Router Rebooter Sensor 🍀 **1.3.0** (2022-08-05) Bug Fixes - **fix(sensor):** Fix known issues Features - **feature(sensor):** Added new device type: Temp Sensor - ST7 - **feature:** Optimized the Sensor Settings interface 🍀 **1.1.0** (2021-12-27) Bug Fixes - **fix(sensor):** Fix known issues Features - **feature(sensor):** Sensor new type support ST3 - **feature:** Optimized situations such as slow request data 🍀 **1.0.20** (2021-09-09) Bug Fixes - **fix(sensor):** Fix known bugs Features - **feature(sensor):** Added ST4 Temperature sensor - **feature(UI):** Added Hub types and cards - **feature(UI):** Adjust Node default value display - **feature:** Added Event fault event type - **feature:** Optimized NodeInfo and Shadow repeated loading issue when first entering 🍀 **1.0.19** (2021-07-04) Bug Fixes - **fix(sensor):** Fix known BUG. Features - **feature(home):** Added video guide for new users - **feature(sensor):** Optimized the Sensor card interface - **feature(settings):** Update time zone information - **feature(settings):** Adds support for more languages: French, Slovenia 🍀 **1.0.18** (2021-01-29) Features - **feature(home):** Optimized the Home page - **feature(suppport):** Optimized Support Section - **feature(sensor):** Optimized Historic Curve Graph - **feature(sensor):** Supported deleting sensor - **feature(Alerts):** Added Alerts Schedule 🍀 **1.0.17** (2020-12-08) Features - **feature(Support):** Added contact us(contact@mocreo.com) Support feature - **feature(sensor):** Support adding Water Leak Sensor and Window & Door sensor - **feature(sensor):** Adapted to more types of temperature and humidity sensors - **feature(version):** Support latest firmware update notification - **feature(notification):** Added Android push notification function - **feature(alarm):** Added a new Alerts control option (delay before Alerts) for Climate Sensor - **feature(upgrade):** Support upgrading the Hub firmware via App / Portal Bug Fixes - **fix(event):** Optimized the event notification - **fix(notification):** Fixed the issue of no sound with IOS notification - **fix(Setup):** Fixed the issue of failing to obtain geographic authorization - **fix(UI):** Some other optimizations on the UI