How often is the sensor measured(Zigbee)?

• The update rules for ST3/ST4 Sensors’ monitoring data are as follows:

  1. If the environmental temperature changes by more than 1.8℉, the monitoring data is updated immediately. (For Hub firmware versions below v1.9.5, if the environmental temperature changes by more than 0.9℉, the monitoring data is updated immediately.)

  2. If the environmental temperature changes by less than 1.8℉, the monitoring data is updated every 10 minutes. (For Hub firmware versions below v1.9.5, if the environmental temperature changes by less than 0.9℉, the monitoring data is updated every 10 minutes.)

  3. By poking the Sensor pinhole for 1 second, the Sensor’s monitoring data is updated immediately.

• The above refers to the reporting interval of Sensor monitoring data, which represents the frequency of Sensor data updates observed in the MOCREO client. As for the data collection interval of Sensors, ST3/ST4 Sensors collect data every 5 seconds while online and every 8 seconds while offline.