Router Rebooter - What are the functions of NM1?

Wi-Fi Network

To view detailed configuration information for the currently connected Wi-Fi network, in order to understand the network settings of the device. (Cannot be modified)

../../_images/nm1settings-1.png

Date/Time

Set the correct time zone information based on your current geographical location.

../../_images/nm1settings-2.png

Monitor List

Manage the Auto Ping list

  • Add Monitor >>> Button to add Auto Ping

  • Name >>> Name of Auto Ping

  • Schedule >>> Management of working hours for Auto Ping

  • Enabled >>> Toggle to enable/disable Auto Ping

  • Operation >>> Edit details of Auto Ping

  • Delete >>> Delete Auto Ping

../../_images/nm1settings-3.png

Ping Target Domain IPv4 Address

  • Manage IPv4/URL

  • Add IPv4/URL

Consider as Failure When No Response from

  • Manage failure conditions when pinging IPv4, divided into Any Target and All Target - Any Target >>> Failure condition triggered when all targets fail - All Target >>> Failure condition triggered when any target fails * If only one IPv4 address needs to be pinged, this rule does not need to be specifically set

Options for Ping

  • Time between pings: Interval between each round of Ping operations

  • Ping Wait Pong Timeout: Timeout for waiting for a response during Ping operations

  • Consecutively Retries Before Attempt Reboot: Number of retries before attempting a reboot

../../_images/nm1settings-4.png

Upon Auto Ping Failure…

  • Do Power Cycle Reboot: Power socket to reboot when Ping operation fails

  • Send E-mail: Notification via email when Ping operation fails

Options for Power Cycle

  • Duration of Power Cycle (Off-to-On): Duration of the power socket’s on-off cycle when Ping operation fails

  • Device Reboot Delay: Delay in waiting for the power socket to reboot when Ping operation fails

  • Total times to attempt reboot: Maximum number of reboot attempts when Ping operation fails

../../_images/nm1settings-5.png

Built-in Outlet

Outlet Control

  • Click the button to control the current state

  • Power Cycle: Perform one relay reboot operation

../../_images/nm1settings-6.png

Power Loss Recovery Mode

  • Turn all Outlets off: The relay is always in the off state after each reboot

  • Turn all Outlets on: The relay is always in the on state after each reboot

  • Return to pre-power loss state: The relay returns to the state before the power loss

../../_images/nm1settings-7.png

Notifications

../../_images/nm1settings-8.png