Monitor Two Different Environments with One Screen Hub
H5Lite-ST6-ST9 combines an H5Lite Hub with two complementary Bluetooth sensors. ST6 tracks ambient temperature and humidity in indoor, non-condensing spaces. ST9 uses a 4.9 ft external probe to monitor damp, enclosed and wider-temperature locations while its main body stays dry.
Core Benefits
- At-a-glance local monitoring: the 2-inch H5Lite display can show sensor readings, trend curves, time, weather and calendar information without opening the app.
- Remote alerts: set high and low temperature or humidity limits and receive configured app and email notifications; the H5Lite Hub also provides local alert feedback.
- Two sensor designs: ST6 suits bedrooms, nurseries, wine cellars, greenhouses and storage rooms. ST9 places an IP67 probe inside a damp or enclosed monitoring point while the non-waterproof sensor body remains outside.
- Accurate climate data: ST6 measures -4°F to 140°F with ±0.5°F temperature accuracy and ±2% RH typical humidity accuracy. ST9 measures -40°F to 221°F with ±0.5°F typical temperature accuracy and ±3% RH typical humidity accuracy.
- Expandable system: the included sensors use Bluetooth LE to reach the H5Lite Hub. Up to 30 compatible BLE sensors are supported per Hub in lab conditions; actual range and capacity depend on walls, interference and layout.
- Long-term review: review supported history in the MOCREO Smart App and export up to two years of raw readings as CSV, with no monthly subscription fee for standard features.
Choose the Right Sensor for Each Location
ST6 Indoor Climate Sensor
Use ST6 for ambient temperature and humidity in dry, non-condensing indoor spaces such as a bedroom, nursery, protected greenhouse, wine cellar, warehouse, server room or storage area. The sensor body is not waterproof and is not recommended inside a refrigerator or freezer.
ST9 External-Probe Sensor
Use the ST9 probe for damp, enclosed or hard-to-reach spaces. The external probe is IP67 and measures temperature and humidity across a wider range. Keep the ST9 body outside liquids and condensation because only the probe is water-resistant.
What’s in the Box
- H5Lite screen Hub × 1
- ST6 temperature and humidity sensor × 1
- ST9 temperature and humidity sensor with 4.9 ft (1.5 m) external probe × 1
Frequently Asked Questions
Do the ST6 and ST9 sensors connect directly to Wi-Fi?
No. Both sensors connect to the included H5Lite Hub through Bluetooth LE. The Hub connects to a 2.4 GHz Wi-Fi network for remote app access and alerts.
Which sensor should I use in a refrigerator or freezer?
ST6 is for indoor, non-condensing ambient monitoring and should not be placed in a refrigerator or freezer. ST9 has an external IP67 probe and a wider temperature range, but installation must keep the ST9 sensor body dry and within Bluetooth range. Confirm that the probe cable does not interfere with the appliance door seal.
Is the entire ST9 sensor waterproof?
No. Only the external ST9 probe is rated IP67. The sensor body is not waterproof and must remain protected from water and condensation.
Can I add more sensors later?
Yes. H5Lite supports compatible MOCREO Smart System BLE sensors. The documented maximum is up to 30 sensors per Hub in lab conditions; practical capacity depends on distance, walls, wireless interference and site layout.
How far can the sensors be from the Hub?
ST6 and ST9 are specified for up to 131 ft (40 m) in open line-of-sight conditions. Walls, floors, appliances and wireless interference reduce the practical range, so test the signal at each planned location before permanent placement.
Is a subscription required?
No monthly subscription fee is required for standard monitoring features. Supported cloud history and CSV export are available through the MOCREO Smart App under the current service policy.
How are the devices powered?
The H5Lite Hub uses USB-C DC 5 V / 1 A power. ST6 and ST9 each use a built-in rechargeable 3.7 V, 1800 mAh lithium battery and charge through Micro-USB at 5 V / 1 A.
